KnowledgeBase Articles Find solutions to common questions and issues with NI products. These articles are written by NI Application Engineers.

Showing 1-10 of 8,673 results
Error -356612 When Connecting to OPC UA Server knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001DjtCCAS&l=en-US
I am using the LabVIEW OPC UA Toolkit to connect my OPC UA client VI to an OPC UA server. The OPC UA Client Connect VI is reporting the following error: Error -356612 occurred at NI OPC UA Client.lvlib:Connect.vi ...

My USRP is not shown on the SystemDesigner in LabVIEW NXG knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001DjsJCAS&l=en-US
I use USRP-2953R connected to the host system via Ethernet using the SFP+ port. The USRP is shown in USRP Configuration Utility but is not shown on the SystemDesigner in LabVIEW NXG.

How Much RAM Can I Use When I Set My PXIe-8880 RT as NI Linux RT OS? knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001DjjWCAS&l=en-US
I have a PXIe-8880 RT controller running NI Linux Real-Time operating system(RT OS). How much RAM can I use in PXIe-8880 with NI Linux RT OS?

How to Calibrate NI Vector Signal Transceiver knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001Djs4CAC&l=en-US
I want to calibrate NI Vector Signal Transceiver module but when I open the NI MAX I do not find any Self Calibrate button. I only have Self Test button, how I am going to do the Self Calibrate for the ...

Cannot Open Functional Safety Editor from LabVIEW Project knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001Djs9CAC&l=en-US
I want to launch Functional Safety Editor from the LabVIEW project. I have right click on the Functional Safety module and select Functional Safety Editor but it prompt the error Could Not Open Functional ...

NI Device Drivers Software Version Information knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001DjrzCAC&l=en-US
Where can I find the versions of all drivers included in the NI Device Drivers download?

Return to Default Font in LabVIEW knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001DjruCAC&l=en-US
I am using LabVIEW and my font has changed. How can I go back to the default font in LabVIEW?

PXIe Module Causes Hang or Blue Screen on New Computer knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001DjUlCAK&l=en-US
I have aPXIemodule. When I use it with a certain computer, the system does not boot properly - sometimes, it causes a blue screen with WHEA_UNCORRECTABLE_ERROR as a stop code, and other times it hangs ...

Digital Pattern Module Showing Nonzero with PPMU on Disconnected Channel knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001DjpeCAC&l=en-US
I have a PXIe-6570 Digital Pattern Instrument and am using the Pin Parametric Measurement Unit (PPMU)to measure the voltage level of a disconnected pin I am not using. I am measuring a nonzero voltage, ...

Conversion of Data from .Bfl File Leads to Wrong Results in DIAdem knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001DjpFCAS&l=en-US
I create a .bfl file in CANalyzerand want to convert defined data with DIAdem using Bus Log Converter. I defined a bus data configuration, the conversion works, but the result does not fit the results ...
222aaa·com男人天堂